At present, in the home floor decoration, the tiles still occupy the absolute mainstream, and the polished tiles are prosperous in the market because of their hard, wear-resistant and suitable for large-scale indoor and outdoor paving. In the face of the variety of ceramic tiles in the market, consumers only have enough knowledge of the knowledge of ceramic tiles to be able to do their best. Below we have a detailed introduction to polished tiles to help you choose the right polished tiles. The polished brick is a kind of bright brick which is polished by the surface of the whole body brick body, and is a kind of whole body brick. The polished tile surface is much cleaner than the whole brick. The polished tiles are hard and wear-resistant and are suitable for use in most indoor spaces except toilets and kitchens, such as balconies and exterior wall decoration. Polishing bricks Advantages: no radioactive elements, no chromatic aberration, high bending strength, thin brick body, light weight, non-slip Disadvantages: the bumps left behind during production are easy to penetrate into the contaminants In the face of polished tiles of different quality, how to identify good or bad? Tell you to identify the five characters that are selected! 1, look Look at the color uniformity of the brick, the surface finish, check for defects such as chromatic aberration, deformation, lack of edges and corners; at the same time, look along the edge of the brick to check whether the edge of the brick is straightened or not, and the back of the brick is the bottom. Whether the embryo is white, whether there is a factory name or a paving arrow, and whether the color is uniform. 2, knock You can tap the tile with your hand or hard object when you buy it. If the sound is very crisp, like the sound of tapping the metal, it means that the ceramic tile has high porcelain density and density, the internal quality is good, and the hardness is high; if the sound sounds like It is the sound of knocking on the wooden board, which indicates that there is a crack inside the brick and the quality is problematic. Since the tiles are to be laid on the ground, people will step on them for a long time. If the hardness is not high, the floor will break. 3, drop The antifouling performance of ceramic tiles is also a must pay attention when consumers buy ceramic tiles. If the antifouling performance of ceramic tiles is not good, the juice or ink will not be cleaned on the top, which will greatly affect the appearance. When you purchase, you can drop colored water droplets (such as ink) on the front of the tile. After a minute of standing, wipe it with a damp cloth. If there are traces on the brick surface, it means that dirt is sucked into the brick; if the brick surface is still bright as a mirror, It means that the tiles are not stained, easy to clean, and the bricks are good. 4, the amount The higher the accuracy of the side length of the tile, the better the effect after the paving. The tape measure is used to measure the size of each tile, and the accuracy is high. 5 The tile has good hardness, strong toughness and is not easy to be broken. Scrub the edges of the tiles with each other to see if the broken fragments are dense or loose. It is brittle, hard or loose, soft, leaving scratches or scattered powder. If it is the former, the latter is worse.
Brass knurled thread insert Made of brass material, good thermal conductivity and heat resistance.
Widely Used On the Injection molding for Tightly Fixing.
Brass knurled Can be installed by ultrasonic or heat into thread tapered hole, or molded in during injection.
We are manufacturer of Insert Nut in China, if you want to buy Embedment Insert Nut,Brass Threaded Knurled Insert,Insert Thread Nuts please contact us.
knurled insert nut,threaded insert nut,wood insert nut,brass insert nut,furniture insert nut Shenzhen Lanejoy Technology Co.,LTD , https://www.brassinsert.net
Polished tile buying tips