As an important decoration of the family, the lamps are related to the quality of home life. If used according to the rules, the service life of the lamps is very long. Correct installation is a prerequisite Proper installation of the luminaire is a prerequisite for extending the life of the luminaire. The lamp of the bathroom shall be equipped with a moisture-proof lampshade, otherwise the service life of the lamp will be greatly shortened; the kitchen lamp should pay special attention to the anti-dust, because the accumulation of grease will affect the illumination of the lamp; and the light-colored lampshade has better transparency, but It is easy to stick to ash, so be diligent to wipe, so as not to affect the penetration of light; and in general, do not let the kitchen and bathroom fixtures be placed in a position where water vapor condensation is easy to avoid bursting. Aging lamp is replaced early If you use the lamp for a long time, the two ends of the lamp will be red or have a black shadow. At this time, it must be replaced in time to prevent unsafe phenomena such as ballast burnout. Generally speaking, when purchasing a luminaire, the effective time is indicated on the lamp bulb, and the aging lamp and the bulb are regularly replaced to help the maintenance of the luminaire. The cleaning method is correct After the lamp has been used for a period of time, a thick layer of ash is deposited on it, which affects the vision, so it should be cleaned regularly. Then, during the cleaning process, please pay attention not to change the structure of the luminaire, and do not replace the parts of the luminaire casually. After the cleaning and maintenance is finished, the luminaire should be installed as it is, and the components of the luminaire should not be missed or misplaced. Generally, the lamp should be wiped with a dry cloth, and pay attention to prevent moisture intrusion. If the lamp is non-metallic, wipe it with a damp cloth to avoid dust accumulation and hinder the lighting effect. Frequent switch the most injured lamp Do not switch frequently when the lamp is in use, because the current through the filament is higher than the current during normal operation, so that the temperature of the filament rises sharply and accelerates sublimation, which will greatly reduce its service life. Reduce the switch of the luminaire. Automatic Sample Impact Notch Machine Automatic Sample Impact Notch Machine,Sample Notching Machine,Notching Machine Blades,Notching Prototyping Machine Dongguan Best Instrument Technology Co., Ltd , https://www.best-tester.com
How to make the life of the lamp extend