Emery Powder Black Silicon Carbide

Emery Powder Black Silicon Carbide Black SiC Mesh Black SiC Granules


Introduction of the silicon carbide:
Silicon carbide is made of quartz sand, stone tar (or coal), wood chips and other raw materials in the resistance by high temperature smelting, silicon and carbon bonds made of ceramic compounds. Silicon carbide exists in nature in the form of rare minerals such as mozanite. Since 1893, silicon carbide powder has been used extensively as abrasive. The sintered silicon carbide powder can provide hard ceramic-like silicon carbide particles and can be used in materials such as automotive brake pads, clutches and ballistic vests that require high durability, such as light-emitting diodes, early radio detectors Classes are also used in the manufacture of electronic devices. Silicon carbide is now widely used in the manufacture of high temperature, high voltage semiconductors. By lely method to grow large pieces of silicon carbide single crystal. The gemstone of artificial mulberry is obtained by cutting the bulk silicon carbide single crystal prepared by the Lely method.
       At present, China's industrial production of silicon carbide is divided into black silicon carbide and green silicon carbide two, are hexagonal crystal, green silicon carbide and black silicon carbide is basically the same, but the raw materials and manufacturing processes are produced, the product was green translucent body , Hardness, purity are better than black silicon carbide.


Commonly size:
Section of sand: 0-1, 1-3, 3-5, 5-8mm
Granular: 16, 20, 24, 30, 36, 46, 60, 80, 100, 120, 150, 180, 200, 220, 320mesh
Powder: 325, 400, 600, 800, 1000, 1200, 1500, 1800, 2000, 2500, 3000mesh


Density: 3.85g/cm3. Bulk density: 1.72-1.95g/cm3.
Appearance: Black or green crystal


Features of the silicon carbide:

1. High hardness.
2. Good thermal conductivity.
3. Small thermal expansion coefficient.
4. Chemical stability.
5. Good wear resistance.

Usage of the silicon carbide:
Firstly: Silicon carbide is mainly used as abrasive in manufacturing grinding wheel, abrasive paper, abrasive belt, abrasive, grinding, grinding head, grinding paste, etc.
Sic grinding tool can be used in the manufacture of consolidation, coated abrasive grinding and freedom, to the processing of glass, ceramic, stone, jade, cast iron, stainless steel, floor tile and some non-ferrous metals, hard alloy, titanium alloy, high speed steel props and grinding wheel etc.
 
The second: refractory materials (silicon carbide powder, silicon carbide particles)
Silicon carbide as inorganic nonmetallic materials with high temperature resistant, wear resistant characteristics of silicon nitride combined with silicon carbide products can be used in the blast furnace ceramic cup, etc.In air brick as ladle with magnesia carbon brick, aluminum silicon carbide can also act as antioxidants added.
Made of silicon carbide refractory plate high crushing strength, long service life, low thermal capacity, low thermal conductivity.The brittle material, good toughness;Good flatness, size accurate,Easily cut installation, construction is convenient;Excellent resistance to wind erosion performance;Continuous production, uniform fiber distribution, stable performance;Excellent sound-absorbing noise reduction performance.
 
Third: steel making, casting industry (particles of silicon carbide, silicon carbide, silicon carbide, silicon carbide powder)
Silicon carbide as steelmaking deoxidizer can make molten steel quality is stable, and has fine grains, remove steel always harmful impurities, after using molten steel casting temperature, casting are of good quality and low cost per unit.
Silicon carbide can be all alternative ferrosilicon and recarburizer FeALSi dosage decreased, which can effectively reduce the cost of steelmaking.
Decomposition of silicon carbide at high temperature and oxidation is exothermic reaction process, positive pressure in the furnace is strong, and can guarantee lower sulfur content.
 
Fourth: photovoltaic industry, polishing, grinding, high-tech research and development, and other industries (silicon carbide micro powder)
Silicon carbide powder is mainly used for refractory products manufacturing, and foam ceramic industry, solar silicon original cutting, crystal cutting, grinding, car engine manufacturing, special coating industry, plastics modification, desulfurization, power supply, environmental protection industry, etc.


Specification of the silicon carbide:

Emery Powder Black Silicon Carbide Black SiC Mesh Black SiC Granules


Introduction of the silicon carbide:
Silicon carbide is made of quartz sand, stone tar (or coal), wood chips and other raw materials in the resistance by high temperature smelting, silicon and carbon bonds made of ceramic compounds. Silicon carbide exists in nature in the form of rare minerals such as mozanite. Since 1893, silicon carbide powder has been used extensively as abrasive. The sintered silicon carbide powder can provide hard ceramic-like silicon carbide particles and can be used in materials such as automotive brake pads, clutches and ballistic vests that require high durability, such as light-emitting diodes, early radio detectors Classes are also used in the manufacture of electronic devices. Silicon carbide is now widely used in the manufacture of high temperature, high voltage semiconductors. By lely method to grow large pieces of silicon carbide single crystal. The gemstone of artificial mulberry is obtained by cutting the bulk silicon carbide single crystal prepared by the Lely method.
       At present, China's industrial production of silicon carbide is divided into black silicon carbide and green silicon carbide two, are hexagonal crystal, green silicon carbide and black silicon carbide is basically the same, but the raw materials and manufacturing processes are produced, the product was green translucent body , Hardness, purity are better than black silicon carbide.


Commonly size:
Section of sand: 0-1, 1-3, 3-5, 5-8mm
Granular: 16, 20, 24, 30, 36, 46, 60, 80, 100, 120, 150, 180, 200, 220, 320mesh
Powder: 325, 400, 600, 800, 1000, 1200, 1500, 1800, 2000, 2500, 3000mesh


Density: 3.85g/cm3. Bulk density: 1.72-1.95g/cm3.
Appearance: Black or green crystal


Features of the silicon carbide:

1. High hardness.
2. Good thermal conductivity.
3. Small thermal expansion coefficient.
4. Chemical stability.
5. Good wear resistance.

Usage of the silicon carbide:
Firstly: Silicon carbide is mainly used as abrasive in manufacturing grinding wheel, abrasive paper, abrasive belt, abrasive, grinding, grinding head, grinding paste, etc.
Sic grinding tool can be used in the manufacture of consolidation, coated abrasive grinding and freedom, to the processing of glass, ceramic, stone, jade, cast iron, stainless steel, floor tile and some non-ferrous metals, hard alloy, titanium alloy, high speed steel props and grinding wheel etc.
 
The second: refractory materials (silicon carbide powder, silicon carbide particles)
Silicon carbide as inorganic nonmetallic materials with high temperature resistant, wear resistant characteristics of silicon nitride combined with silicon carbide products can be used in the blast furnace ceramic cup, etc.In air brick as ladle with magnesia carbon brick, aluminum silicon carbide can also act as antioxidants added.
Made of silicon carbide refractory plate high crushing strength, long service life, low thermal capacity, low thermal conductivity.The brittle material, good toughness;Good flatness, size accurate,Easily cut installation, construction is convenient;Excellent resistance to wind erosion performance;Continuous production, uniform fiber distribution, stable performance;Excellent sound-absorbing noise reduction performance.
 
Third: steel making, casting industry (particles of silicon carbide, silicon carbide, silicon carbide, silicon carbide powder)
Silicon carbide as steelmaking deoxidizer can make molten steel quality is stable, and has fine grains, remove steel always harmful impurities, after using molten steel casting temperature, casting are of good quality and low cost per unit.
Silicon carbide can be all alternative ferrosilicon and recarburizer FeALSi dosage decreased, which can effectively reduce the cost of steelmaking.
Decomposition of silicon carbide at high temperature and oxidation is exothermic reaction process, positive pressure in the furnace is strong, and can guarantee lower sulfur content.
 
Fourth: photovoltaic industry, polishing, grinding, high-tech research and development, and other industries (silicon carbide micro powder)
Silicon carbide powder is mainly used for refractory products manufacturing, and foam ceramic industry, solar silicon original cutting, crystal cutting, grinding, car engine manufacturing, special coating industry, plastics modification, desulfurization, power supply, environmental protection industry, etc.


Specification of the silicon carbide:

LED Aquarium Light

We supply affordable LED marine lighting to a wide range of clientele,and can fulfil any order, large or small, from small private tanks to large industry sized outfits.Besides,we made aquarium sets use super bright fully submersible LED strip lights which create a beautiful effect on the water and are safe to use all year long.

An aquarium adds a decorative feature to any home. LED lights are becoming widely popular among the aquarium enthusiasts. Specialized LED Aquarium Lights help create a better environment for the fishes and the aquatic plants. They consume less energy and generate less heat as compared to the as compared to the normal lights. The new LED lights do not produce excessive heat even after continuous operation, which helps maintain the water temperature and does not allow for excess evaporation. This helps create a healthy environment for the corals and fishes. LED Aquarium Lights are revolutionary products that add to the beauty of a home while being energy-efficient, environmental-friendly and convenient.

Key Features

1.The lifespan is over 50000 hours,low maintenance costs.

2.Energy conservation,saving over 80% energy than the traditional HPS.

3.High light efficiency,90% of the light will be absorbed by the aquatic plants,while just 8%-10% to the HPS.

4.Build-in cooling system,could solve the heat dissipation excellently.

5.Built-in power supply, CE approved, No setup required, just simpler and safer plugs directly into AC85V-264V, no reflector & ballast needed.

Application

1. coral reef lighting,fish tank lighting,coral reef tank lighting

2. aquarium lighting,aquarium art,aquarium shop,aquarim centre

3. fish bowl lighting,fish lighting,freshwater lighting,saltwater lighting

Item Display

Package Include

1 X LED Aquarium Light

1 X Free Hanging Kit

1X Free Power Cord

All the lamps have passed strict quality examination and are packed carefully before shipping.In order that our customers get high quality lamps,we attach importance to every details.

Company Info

Philizon Lighting is dedicated to provide high quality and durable lighting product for customer with very competitive price.Our products mainly foucs on LED Grow Lights and led aquarium light.The equipment and materials to produce hydroponics led Grow Light and LED Aquarium Light fixctures imported from Taiwan, Japan, Korea and Unites States, such as automatic SMT machine, reflowsoldering machine,all kinds of electric test equipment, large integrating sphere and such sorts of productionand R&D equipment.

Trade Terms

Payment: T/T, L/C, Paypal, 30% deposits before production, 70% balance to be paid before deliverying(Western Union are welcome)

Sample will be delivered within 7 working days.

Discounts are offered based on order quanlityes.

MOQ:sample order are acceptable

Delivery ways:DHL,UPS,FedEx,TNT, door to door,by sea,by air,etc.

Warmly welcom to take a visit on our factory at any time and we will pick you up at the airport or hotel in Shenzhen.

Aquarium Plant Led,Led Aquarium Plant Light,Led Aquarium Light,Aquarium Led Fish

Shenzhen Phlizon Technology Co.,Ltd. , https://www.szledaquariumlighting.com