Sandvik Coromant: Tool design is different

Modular solution based on standard tools

Aeroengine parts are made of high-toughness materials with complex properties, which are very demanding on the process, which requires the use of non-standard tools too frequently. Currently, the solution comes from a standard machining mode for a specific industry, where versatility and specificity are provided by a modular tooling system. For example, for turning, grooving and thread cutting, the system that makes up the solution is suitable for almost any configuration. Based on the serrated lock interface SL between the bladed insert and the tool holder, this interface can be used regardless of the process and tool configuration required. For many cutting and grooving operations, this interface is now becoming the standard platform for non-standard tools and has proven to be very suitable for aerospace and energy industry parts as well as many other types of industrial applications such as automotive and multi-tasking machines. Tool rationalization work.

As a result, the purely dedicated range of tools can be reduced to a minimum and industry-specific cutting heads (possibly standard or non-standard cutting heads) and standard posts are typically used. If desired, the post itself can also be a non-standard tool, such as when higher accessibility, blade tilt, or multiple cutting heads are required on the same tool in a particular setup. In this way, when the post and the insert are standard, the process can be covered with the smallest non-standard tool stock.

The benefits of the serrated lock interface system maximize the characteristics of the Coromant tool, such as the most stable and robust performance of the Capto interface at the rear shank coupling, and the front-end weight reduction design with the damper damper. Corresponding anti-vibration tool and allow for high pressure coolant supply options. There are many deep and complex cavities in aircraft parts that are very similar. It is possible to combine tools in the form of modular cutting heads with a knives suitable for grooving and profiling for “standardization” operations. This platform for non-standard solutions is based on a dedicated standard blade and toolholder concept - developed for machining aircraft parts and materials.

Previous page 1 2

8pcs Folding Hex Key Set

8pcs folding hex key set.hex key set, hex key,folding hex key, hex key tool

henan horn tools co.,ltd. , https://www.horn-tool.com