Winter decoration often encounters three major problems

Winter decoration is difficult without fear because there are countermeasures. To understand the three major problems encountered in winter decoration, you can do well in advance:
Frinne paint master paint
problem 1: veneer cracking solution: After the decorative panel is transported to the construction site, apply a dry towel to wipe off the dust, and apply the brush twice to cover the varnish continuously. All the decorative panels should be laid flat, with a large core board on the bottom and a large core board on the top, which cannot stand upright. This will prevent the panel from cracking and warping.
Problem 2: Wall Cracking Solution: Normally open windows for ventilation, the best time is between 10am and 4pm. The relatively high temperature during this period of time can prevent the newly approved putty from freezing. After the putty was completely dry the first time, it was approved a second time. After the second putty is completely dry, sand it carefully. Sand gray walls and heat preservation walls are best filled with beanbag cloth or indeed good cloth. They are used to scrape putty directly on beanbag cloth or indeed cloth, and then dry it with sandpaper.
Walls have large holes or depressions. It is best to use gypsum powder and latex to reconcile and flatten the wall to facilitate quick drying and solidification. When there is a large crack in the wall, the local place will be replenished with putty kraft paper. When the area is larger, it is best to paste beanbag cloth and then putty.
Problem 3: Gypsum board ceiling cracks, plaster line cracking Solution: During the gypsum board ceiling operation, gaps of about 1 to 2 cm are reserved for all joints between gypsum board and gypsum board and wall surface. Caulking, then double kraft paper, scrape putty.
The moisture content of the wooden keel must be controlled below 12%, and the "keel" must be firm and it cannot be loosened, so that cracks in the gypsum board ceiling can be prevented. When the plaster line is plastered, leave gaps of about 0.5 cm between the gypsum board and the top surface and the wall surface. Use gypsum powder and latex to reconcile the gaps to prevent the plaster line from cracking.
Links: 5 Experiences of Users Sharing Green Paint

Experience talk about paint decoration paint window

Round Sling

2T Green Round Sling,Round Sling,Custom Rond Sling,Polyester Rond Sling

SHAOXING GULI BELTING CO., LTD , https://www.gulilifting.com