Hardware Knowledge Base: "Railway"

Slide Introduction

The track is fixed on the ground and the motor base is fixed on the track. The drive belt extension motor can slide on the track to adjust the slack of the conveyor belt

Ordinary grooved or curved guide for movement of doors, drawers or other moving parts, often fitted with ball bearings

Slide rail

If the hinge is the heart of the cabinet, then the slide is the kidney. Whether the drawers, large or small, can be pushed and pulled freely, and how heavy the load is, depends on the support of the slide rails. From the current technology point of view, the bottom rail is better than the side rail, and the overall connection with the drawer is better than the three-point connection. Drawer slides vary in material, principle, structure, and process. High-quality slides have low resistance, long life, and smooth drawers.

Select points

1. Test steel. How much weight the drawer can support, mainly depends on the quality of the steel in the track. Different thicknesses of drawer steels have different thicknesses and different bearing weights. You can pull out the drawer when you are purchasing it and use your hand to press it slightly to see if it will loosen, squeak, or flip.

2. Look at the material. The material of the pulley determines the comfort of the drawer when it slides. Plastic pulleys, steel balls, and wear-resistant nylon are the three most commonly used pulley materials, of which the wear-resistant nylon is the top grade, and it slides silently. To see if the pulley is good or bad, you can push and pull the drawer with one finger. There should be no astringent feeling and no noise.

Pressure device

In the cabinet hardware accessories, apart from the slide rails, the drawers and hinges closely associated with them, there are many pneumatic and hydraulic device type hardware. These fittings are produced in response to evolving cabinet design methods, and are mainly used for flip-top doors and vertical lift doors. Some devices have three or even more braking positions, also known as "free to stop." Cabinets with pressure devices installed are quiet and easy to use for the elderly

Select points

To see if the pressure device works well, try it more! See if it's easy and the brake is convenient. However, it should be noted that the pressure device is good, but it is expensive.

Cutting Equipment

Trojan material technology co., Ltd is China metallographic precision sectioning machine Manufacturers and metallurgical precision sectioning machine suppliers, High quality, factory direct sales,metallographic grinding All kinds of grinding and precision cutting machines and slice saw equipment for metallographic testing. Sample preparation for microscopic examination begins with a reduction in quality. Suitable equipment has a firm and stable appearance to minimize the depth of sample surface deformation. Grinding saws and precision saws save time by limiting the number of steps required to analyze samples after slicing. Find the right sharpening, Precision Cutting Machine or slicing consumable product for your material testing application below.

Equipment to meet various cutting needs

Fast and accurate cutting requires carefully developed equipment and consumables. We offer a complete range of cutting machines, gripper tools and cutting wheels, all designed to ensure convenient, efficient and deformation-free cutting for a wide range of workpiece sizes.

Manual, automatic and semi-automatic machines

Machine suitable for all workpiece sizes and requirements

Floor stand and table top machines

cutting

Cutting Equipment,Metallurgical Cutting Machine,Cutting Machine Metallography,Sample Cutting Machine

TROJAN (Suzhou) Technology Co., Ltd. , https://www.troolymaterial.com