How to melt the 6063 alloy with a good, what stove, which is also very important, and now the domestic use of the furnace has the level of the 40's, but also the level of the 90's, the poorer manufacturers use the original helium boiler. There are coal-fired, oil-burned, gas-fired and electrically heated smelting furnaces. Some stoves have chimneys, and some have no chimneys. The most commonly used are square-shaped furnaces (rectangular furnaces), advanced circular furnaces, and some circular furnaces can tilt aluminum water. On the tonnage of one ton, two tons, five tons, ten tons, twenty-five tons and fifty tons of aluminum melting furnace. More advanced, in the melting furnace below plus a static furnace, static furnace 6063 alloy used in the preparation of important, in addition to the slag in the furnace gas, standing, and then cast aluminum rod for extrusion use. The quality of the alloys formulated in the original coal-burning furnace and the modern circular furnace is not the same. In general furnaces, no matter what kind of fuel is burned, there should be a chimney, and most of the waste gas generated during the combustion of fuel can be discharged from the chimney. If the smokeless exhaust gas slag is completely melted in the aluminum water, the aluminum rod used for extrusion is cast, and there are serious slag inclusion bubbles in the interior. This is one of the reasons for the inferior quality of the aluminum material, which is one of the reasons for the low price of aluminum.
Variable Peristaltic Pumpis a peristaltic dosing pump that can distribute many types of liquids, such as water-based liquid/shampoo/sauce/chemical-based liquid, etc.
The flow rate of the industrial variable speed Peristaltic Pump can be adjusted by the digital knob to adjust the motor speed to achieve the effect of adjusting the flow rate
The liquid only gets in touch with the Peristaltic Pump Tubing, will not cause cross-contamination. it's suitable for Liquid transfer occasions with high cleanliness requirements, Eg. : food/beverage/cosmetic/medical/biopharmaceutical...
For the Peristaltic Pump Tubing, We have different material choices for your various liquids. The standard tube is silicon tubing which conforms to the FDA certificate. Except that we also offer the Saint-Gobain imported tubing, Eg.: Norprene®A-60-F/Norprene®chemical /Pharmed® BPT... Which suitable for various chemical-based liquid.
Suitable for various industrial applications.
Variable Peristaltic Pump,Intelligent Programmable Pump,Dosing Peristaltic Pump,Timed Quantitative Pumps Baoding Chuangrui Precision Pump Co., Ltd. , https://www.chuangruipump.com
How to configure the aluminum smelting furnace