Stainless Steel Nut:
Self locking nut, lock nut, four jaw nut, screw in nut, safety nut, thin rod screw connecting nut, self-locking hexagon cap nut, special anchor screw nut, hexagon crown thin nut and lifting ring nut.Fine tooth all metal hexagon flange lock nut, all metal hexagon flange lock nut, fine tooth non-metal insert hexagon flange lock nut, fine tooth hexagon flange nut,Welding square nut, welding hexagon nut, fastening nut, embedded round nut.
Nuts Screws,Hexagon K Nuts,Open End Rivet Nut,Carbon Steel Flat Head Rivet Nut Suzhou Gubao Screws Co.,Ltd. , https://www.hongyiscrew.com
Drilling limit of lathe
In the ordinary lathe, the tailstock is used for drilling. If the operator does not care whether the power and structure of the lathe can meet the production process requirements, how many holes are drilled, how many holes are drilled. The result of this is very unfavorable for the lathe: On the one hand, when the cutting torque of the drilling hole is too large, the drill bit slips in the taper hole of the lathe sleeve of the lathe, and the surface of the tapered hole is seriously studied.