New house decoration, painting the walls is an inevitable process. However, if the overall effect of the room is to be optimal, it depends not only on the quality of the wall paint, but also on the superb skills of the decoration master. Then, what is the construction process of the wall paint ? Here's a small one for everyone. Brush paint 1, preparation before construction First of all, before the wall surface construction, the wall surface should be kept dry. Its surface water content should not be higher than 6%, the PH value should not be less than 9%, and cement construction generally requires maintenance from 20 days to 40 days. . Secondly, before the construction, the wall should be cleared once, bulging, degreasing, dust removal, loosening, and so on. When it is clear, it can be washed first with dilute acid water, then rinsed with clean water, and then dried. Paint paint preparation, in addition to mold when you can use a blade to eradicate the mold surface of the construction, and then rinse with water, after washing both sides after drying, you can paint. Finally, the construction should be based on the conditions of the climate or brushing, should add a small amount of water or thinner. Brush wall paint 2, interior wall paint construction process In the first step, the surface of the wood products is cleaned with dust, and then the surface defects of the wood products are corrected, and the surface of the wood products is polished, and the corners can be polished neatly. In the second step, the oily putty is scraped once, polished and then polished with refilling putty. The third step, you can paint on the wall, and make up for putty, remove dust after polishing. In the fourth step, brush the paint again. After polishing, remove dust from the surface and grind it with water. Brush paint 3, basic skills a. When painting the wall, in order not to cross the boundary of the paint brush, a ruler or cardboard may be used as an auxiliary tool to press the edge and brush along the edge to brush off the wall. Effect. b. If the arced area on the wall needs to be painted, you can use the torn tape to give the curve out. In this way, the curve will be painted beautifully. c. The painting wall should be painted vertically. The width of each painting is two feet. You can also add some horizontal brushing methods to smooth out the coating. d. After the paint on the wall is finished, you can use the micro-stained paint brush to brush again on the wall until all the lines are removed. Xiao Bian concludes: The above is the introduction of the content of the construction process of the wall paint , hoping to help those who have this need. After all, most of the people are non-professionals. If you are worried about spending too much money, it is not unfeasible if you want to go in for yourself. However, it is more necessary to understand the contents of the above. Scaffolding Poles,Folding Trestle,Tubular End Bracket,Scaffolding Accessories Kaiping Youying Metal Products Co., Ltd , https://www.yyscaffold.com
What are the basic skills of brushing wall paint in the construction process of brush wall paint?