Ceiling is one of the most common decorative methods for the top of our ceiling. Light steel keel plasterboard is frequently used in indoor ceilings. How do we hang the indoor ceiling ? Today we introduce the following content and learn to understand. How to hang the ceiling in the room! How to hang indoor ceiling - bomb leveling Before the ceiling, you need to use the spirit level to determine the horizontal position on the corner of the construction wall. The height of the horizontal line is generally 50 cm, plus the thickness of the gypsum board. Then use the ink line to eject the ceiling position one by one on the wall. This is also the lowest line of the sub-keel position, and then the height of the main keel is popped according to the drawing of the ceiling. The main keel extends from the middle of the ceiling to the two sides. The maximum distance between the keels is 1 meter. At the same time, the position of the boom should be clearly defined. The distance between the two is generally between 90 cm and 1 m. If the ceiling has beams and pipes, the number of booms should be increased. How to hang indoor ceiling - fixed hanging rod After the bullet line has determined the position of the suspended ceiling, it is necessary to fix the suspended ceiling bar, use the impact drill to drill holes in the ceiling plate, and insert the expansion bolt to fix the position. One end of the boom marked with a numerical code is welded, and the Other end is welded with a threaded rod. The boom is then rust proofed. When installing the boom, it is necessary to ensure that the rod has a good bearing capacity. In addition, if the rod is too long, it needs to be firmly welded. If there is a need for a lamp or vent, the boom needs to be provided. How to hang indoor ceiling - keel installation Firstly, the side keel needs to be installed. Beforehand, the installation position should be made into a good line. The L-shaped galvanized light steel bar should be embedded on the wall with a shot nail to fix it. It should be noted that the distance between the spotlights should be less than the distance between the secondary keel. . The main keel should be mounted on the boom, the installation direction should be parallel to the length of the space, and the keel distance is between 90 cm and 1 m. The main keel is also required to be arched, and the height is a few hundredth of the span of the room. The cantilever section should not exceed 30 centimeters. If it is larger than this value, it needs to increase the number of booms. Similar keel joints should be staggered and need to be leveled after the main keel is hung. In addition, at 1.5 meters away from the main keel, large keels should be erected, and the main keel should be welded to each other to ensure that the ceiling is used more firmly. The installation of the secondary keel should be affixed to the main keel. The distance between the keel is 30-60 cm. T-shaped galvanized iron sheet is used to fix the secondary keel on the main keel. Both sides of the secondary keel should be at the level of the L-shaped keel. At this point, the ceiling skeleton is almost completed, and the overall correction work is needed to see whether the keel is of a reasonable level and whether the hanging rod is firm and the ceiling skeleton is stable. How to hang indoor ceiling - panel installation After the ceiling frame is installed, the installation of the paper gypsum board can be carried out. If the shelving method is adopted, the panel should be installed with the flattening module, and the gap between each panel should not exceed one millimeter. If you use the gag method, you need to install the grooved parts around the panel on the T-shaped keel, which can also be called the concealed installation of the ceiling. With regard to how to lift the indoor ceiling , Xiao Bian introduced it here temporarily and hoped to help you. If you want to learn more about the indoor ceiling knowledge, you can pay attention to this site information, more exciting content waiting for you. How to hang the suspended ceiling in the ceiling installation room Ningbo Kyson Cool Electronic Technology Co., Ltd. , https://www.kysonrefrigeration.com
How to hang the light steel keel plasterboard on the indoor ceiling