Hot Dipped Cold Rolled Galvanized Steel Coil /Sheet /Strips

  • Standard: ASTM, JIS, GB, AISI, BS
  • Surface Treatment: Galvanized
  • Application: Ship Plate
  • Stock: Stock
  • Width: 600-1250mm or Customized
  • Zinc Coating L: 60-275G/M2
  • Transport Package: Standard Seaworthy Exporting Package
  • Origin: China
  • Certification: ISO
  • Technique: Cold Rolled
  • Edge: Slit edge
  • Original Place: Shandong, China
  • Thickness: 0.16-1.6mm
  • Trademark: QS
  • Specification: First-class grade
Hot Dipped cold rolled Galvanized Steel Coil /sheet /strips

Specifications:


Cold Rolled Hot Dipped Galvanized Steel Coil for Making Roofing
 

Working shop:

Cold Rolled Hot Dipped Galvanized Steel Coil for Making Roofing

 


Advantages of Cold Rolled Hot Dipped Galvanized Steel Coil 

1.Excellent corrosion resistance: The zinc layer provides a good protection of Pre-painted Galvanizeed Steel Sheet.

2.High heat resistance: The reflective surface of the material aids in efficiently reflecting the sunlight away and in turnreducing the amount of heat transmitted.

    The thermal reflectivity converts into energy savings.

3.Aesthetics: Galvanized steel sheet is available in plethora of patterns and multiple sizes as per the requirements that given by our customers.

4.Versatility: can be used in the various areas.
5. Quick delivery time and high quanlity as well as very competitive price 

Pls do not hesitate to contact us if needed 


 


 

IECEx Approved Coriolis Mass Flow Meter

Zhejiang Sealand Technology Co., Ltd. is a trustworthy manufacturer of Mass Flow Transmitter, Coriolis Mass Flow Transmitter, Coriolis Mass Flow Sensor, Mass Flow Sensor & Mass Flow Sensor Coriolis, ATEX, IECEx & CE approved.


The meter can be connected with computer as follows. Connect the meter and computer with a USB-to-RS485 converter( converter A+ end to transmitter A+ end, B- to B-, and GND to GDN); turn to device manager of the computer to check COM port connected with meter. Start the software, select the right COM port and click Connect; do not change any other parameters (if you do not know the right one, click Automatic options on the left, click Connect, plug & unplug the transmitter, and then check if it is connected). You can click Connect on the tool bar to disconnect or connect again. It will shown Connected/Not Connected at the bottom of this interface.


The flow direction is settable. There are 4 options, forward(default), reverse, absolute value & bi-direction. There is a direction mark on the sensor. Forward means the same direction with the mark on sensor, the meter will only count the flow in this direction; reverse means the opposite direction of the mark, the meter will only count the reverse direction; bidirectional means that the meter will measure both directions, it increases when it is forward and decreases when reverse; absolute means it increases no matter it is forward or reverse.

Mass Flow Transmitter, Coriolis Mass Flow Transmitter, Coriolis Mass Flow Sensor, Mass Flow Sensor, Mass Flow Sensor Coriolis

Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeters.com