Keychain Light Keychain Light,Rechargeable Keychain Light,Small Keychain Light,Button Keychain Light Cangnan Younglite Electrical Co., Ltd. , https://www.younglitetec.com
The building wall-mounted advertising machine is one of the advertising machines, and is different from the simple placement of the vertical advertising machine. It needs to be more firmly installed on the wall so that the wall-mounted advertising machine can be used better. It involves the installation environment, The installation position, the load bearing of the bracket, the bearing of the wall surface and other issues, so the wall-mounted advertising machine must master the installation skills when installing to ensure normal use.
Many people doubt that the wall-mounted LCD advertising machine does not know how to install it. The installation instructions that may be equipped with electronic or paper accessories are not very clear. This article will teach you the correct installation steps and methods for building wall-mounted advertising machines:
1. The machine is taken out from the inside of the package, and the protective bag and accessories on the outside of the package are all taken out for use. 
2. The machine is placed flat on the outer packaging of the machine to prevent bumping or friction. 
3. Open the safety door with the safety key delivered with the wall-mounted advertising machine. 
4. After the safety door is opened, use a screwdriver to remove the safety inner screws of the wall mount to facilitate the removal of the back plate of the wall mount. 
5. Install WIFI antenna to connect WIFI network, RJ45 network cable is also supported. 
6. Use a spirit level or a tape measure to measure the horizontal fixation of the installation position and height width of the building wall-mounted advertising machine, and mark the points with a pen. Make sure that the wall can bear the weight of the machine, preferably a solid wall. 
7. Install the back plate on the wall mount to confirm the hole position on the wall, use expansion screws and steel nails to drill holes, or tap to fix the back plate. 
8. After fixing the back panel of the building wall-mounted advertising machine, two people jointly lifted the machine to the position where the back panel was fixed, and fixed several fixed card positions of the fuselage. Remove. 
9. Plug in the power cord, turn on the power switch to power on the machine 
10. Turn on, remember to connect the network WIFI or network cable to play. 
Matters needing attention: pay attention to the indispensable accessories of the wall-mounted advertising machine, the horizontal value of the fixed position of the machine wall, remember to lock the safety screw after installing the machine, place it for theft, and confirm the wall structure that can bear the weight of the machine
================================================== ================================================== ======
Yirui Technology (YIRV) is a manufacturer mainly engaged in LCD advertising machines. It produces and sells outdoor advertising machines, LCD advertising machines, electronic class cards, touch advertising machines, Android integrated machines, elevator advertising machines, multimedia teaching integrated machines , Shoeshine advertising machine, car advertising machine, LCD splicing screen and other industries. Provide all users with a full range of commercial display equipment solutions. 
Correct installation method of building wall-mounted advertising machine