Peixian Rubber Waterstop Manufacturers Installation Reference Method Rubber waterstop manufacturers installation can refer to "Underground Construction Waterproof Structure", or refer to the manufacturer's instruction manual, but no matter what information is referenced, the installation precautions are still not comprehensive. According to the construction experience, we Hebei Tushun Rubber Company summarized the following contents: Diverse product selection: PVC floor mat manufacturers in China usually offer a wide selection of products, including different designs, sizes and functions. This diversity allows buyers in Europe and the United States to choose appropriate products according to market needs and consumer preferences. Swimming pool mats,Non Slip Bath Mat,Non Slip Mat,Pool Mat,Under Pool Mat Jiangyin Yining E-Commerce Co., Ltd , https://www.pvcmatyining.com
Rubber water stop belt manufacturers can be classified into middle-buried rubber water stop belts and back-attached rubber water stop belts (outside-attached rubber water stop belts), steel-edge rubber water stop belts, and water-swelling rubber water stop Belt, flat type waterstop. The externally-attached waterstop or back-attached waterstop refers to the externally-attached middle non-porous waterstop. The back-attached waterstop is mainly applied to the outside of the bottom or wall of the concrete structure (concrete facing the water). In practical application, it is mainly used in the initiation seam, complete shrinkage seam and incomplete shrinkage seam of structures. It has the characteristics of tight anchorage with concrete, water-proof sealing and elastic tensile deformation. The water-stop belt is made of elastic materials and mixed with a variety of auxiliary additives, which are made by mixing.
The rubber water stop belt plant is partially or completely buried in the concrete during the concrete pouring process. During the embedding, the interface between the concrete and the concrete should be flat and smooth, and the joints should be bonded and fastened. During the embedding process, the concrete should be fully vibrated to make it combine well with the concrete to obtain a good water-stop effect.
The construction precautions of rubber water stop manufacturers are as follows:
1. The water stop should not be exposed in the open air for a long time to prevent rain and do not contact with highly polluting chemical substances.
2. In transportation and construction, prevent damage to the waterstop by machinery and steel bars.
3. During the construction process, the water stop must be reliably fixed to avoid displacement when pouring concrete and ensure the correct position of the water stop in the concrete.
4. The method of fixing the waterstop is: using additional steel bars; special fixtures; lead wire and template fixation (Figure 2). If perforation is required, it can only be selected at the edge of the waterstop installation area. section.
5. When ordering, the user should calculate the product length according to the engineering structure and design drawings. The special-shaped structure should have a drawing description. Try to connect the water stop belt as a whole in the factory. If you need to connect on site, you can use an electric heating plate to bond Or cold bonding (rubber water stop belt) or welding (plastic water stop belt) method, if the user has difficulty connecting, our company can send technical personnel on-site guidance.
The mid-buried rubber waterstop factory belt is a semi-finished material, and the construction is easy to cause quality neglect, which leads to hidden quality hazards; pay attention to various technical indicators during construction, and the quality department inspection must be strictly implemented in accordance with the standard; The exposed parts are easy to aging, and the tensile strength of the exposed parts is greatly reduced after aging, so it is necessary to pay attention to the protection of the exposed parts; pay attention to the scientific and reasonable treatment of the deformation joints at the rubber waterstop; the back-attached rubber waterstop should be hard protected; Rubber waterstops are not suitable for large deformation projects. If leakage occurs, it can be repaired effectively and quickly through grouting, the waterproof quality is reliable and does not recur, and its comprehensive cost is relatively economical, which solves the weakness of the traditional waterstop.
Tips:
The mid-buried rubber water stop belt plant has its advantages and weaknesses. How to use rubber water stop at construction joints and deformation joints and how to construct it is particularly important in waterproofing projects. The construction unit should not choose it privately, otherwise it will be safe for the project quality and structure. Caused inestimable losses, this is the result that any construction management personnel and construction unit do not want to see, so it is said to be familiar with the performance of rubber waterstops, pay attention to the installation and use requirements of rubber waterstops is the premise of selecting rubber waterstops condition.
================================================== ================================================== ======
13313081215 king 
High quality standards: With the continuous development of China's manufacturing industry, many manufacturers have strengthened the control of product quality. While meeting international standards, China's Pvc floor mats also provide certain customization and upgrade options to meet the demand for high-quality products in Europe and the United States.
Peixian Rubber Waterstop Manufacturers Installation Reference Method