Digital Display Torsion Testing Machine Torsion Tester,1000Nm Torsion Testing Machine,Wire Torsion Testing Machine,Digital Display Torsion Testing Machine Jinan Chenda Testing Machine Manufacturing Co., Ltd. , https://www.jncdtester.com
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131"; Home>Bearing knowledge>How to ensure that the bearing device does not deform How to ensure that the bearing device does not deform
1. The roundness of the shaft and the seat hole and the straightness of the shoulder should be required according to the corresponding precision of the bearing. /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
2. It is necessary to accurately calculate the interference of the rotating ferrule cooperation; it is also necessary to accurately calculate the appropriate cooperation amount of the fixed ferrule.
Rotating ferrules should also be smaller in the possible range. It is only necessary to ensure the thermal expansion effect at the operating temperature; and the centrifugal force at the highest speed; it does not form a tight cooperation surface movement or sliding. Fixed ferrule According to the size of the working load and the bearing scale; choose a small gap cooperation or interference cooperation; too loose or too tight are arrogant to adhere to the original accurate shape.
3, the bearing works under high speed conditions; and the operating temperature is higher; should pay special attention to the cooperation of the rotating ferrule can not be too loose; to avoid the appearance of painful oscillation; and the cooperation of the fixed ferrule can not present the gap; to avoid the ferrule Deformed under load and provokes oscillation.
4. The condition for adopting small interference cooperation on the fixed ring is that the surface has a high shape accuracy and a small roughness on both sides; otherwise, it is more difficult to form the device and it is more difficult to disassemble; in addition, it is necessary to consider the influence of the spindle thermal elongation. .
5, the use of pairs of double-angle touch ball bearings of the main shaft; 80% load is light; if the cooperative interference is large, then the internal axial preload will be significantly larger; the formation of helium impact. Use double column short The main shaft of cylindrical roller bearing and the main shaft of tapered roller bearing; its load is relatively large; so its cooperation and interference is relatively large.
Recommend to friends comments close window Bearing related knowledge NSK cylindrical hole bearing equipment method analysis of foreign machinery industry bearing heat disposal method (below)
The definition of bearing life
Analysis of the Causes and Countermeasures of the Oscillation of Bearings in TIMKEN Bearings and the Temperature of Bearings
This article links to http://
Please indicate the bearing network http://
Previous: Bearing method next: IKO bearing smooth protection method
How to ensure that the bearing device does not deform
Source: China Bearing Network Time: 2018-05-08